中文English
Home > Products > 工业设备

Products

Product
工业设备

Equalizer FC10TE Hydraulic Flange Closing Tool

Equalizer法兰封闭工具用于在安装或维护期间将法兰拉在一起。

FC10TE可用于螺栓孔直径为22毫米（7/8英寸）或更大的任何法兰。
FC10TE采用串联液压缸设计，具有非常低的外形，这使得FC10TE可用于通道受限的小直径法兰以及更大的法兰。
该工具可用于螺栓孔直径为22毫米（7/8英寸）或更大的任何法兰上，每个工具可以以10吨（100千牛）的力从600毫米的距离拉至0毫米。
建议至少使用两个工具，但FC10TE可以多次使用以达到所需的拉力。
标准套件
产品编号:FC10TESTD

内含物:
1个FC10TE法兰封闭工具
2个10，000磅/平方英寸（700巴）5吨液压缸
1根10，000磅/平方英寸（700巴）液压软管
1台10，000磅/平方英寸（700巴）HP550S液压手泵
1本说明手册
1个带泡沫衬垫的手提袋
大号套件
产品编号:FC10TEMAX

内含物:
2个FC10TE法兰牵引工具
4个10，000磅/平方英寸（700巴）5吨液压缸
2根10，000磅/平方英寸（700巴）液压软管
1台HP550D液压手泵
1本说明手册
1个带泡沫衬垫的手提袋
FC10TE法兰封闭工具可用于以下情况:
试车
建筑
日常保养
关机/停机
阀门更换
运营优势:
减少操作员疲劳。
收缩点减少。
快速且易于使用。
法兰或任何其他重型设备的可控牵引。




Share：

Products

The Equalizer™ Flange Closing Tool has been developed to pull flanges together during installation or maintenance. 

  • The FC10TE can be used on any flange with a bolt hole diameter of 22mm (7/8”) or greater.
  • The FC10TE has been designed utilizing tandem hydraulic cylinders to create a very low profile, this allows the FC10TE to be used on small diameter flanges with limited access as well as larger flanges.
  • The tool can be used on any flange with a bolt hole diameter of 22mm (7/8”) or greater, and can pull from a distance of 600mm down to 0 mm with a force of 10T (100kN) per tool.
  • It is recommended that 2 tools are used as a minimum but the FC10TE can be used in greater multiples to achieve the pulling force required.

Standard Kit

Product code: FC10TESTD

Inclusions:

  • 1 x FC10TE Flange Closing Tool
  • 2 x 10,000psi (700bar) 5T Hydraulic Cylinders
  • 1 x 10,000psi (700bar) Hydraulic Hose
  • 1 x 10,000psi (700bar) HP550S Hydraulic Hand Pump
  • 1 x Instruction Manual
  • 1 x Carry Case with Foam Inserts

Maxi Kit

Product Code: FC10TEMAX

Inclusions:

  • 2 x FC10TE Flange Pulling Tools
  • 4 x 10,000psi (700bar) 5T Hydraulic Cylinders
  • 2 x 10,000psi (700bar) Hydraulic Hoses
  • 1 x HP550D Hydraulic Hand Pump
  • 1 x Instruction Manual
  • 1 x Carry Case with Foam Inserts

The FC10TE Flange Closing Tool Can Be Used During:

  • Commissioning
  • Construction
  • Routine maintenance
  • Shutdowns/outages
  • Valve change-outs

Operating Benefits:

  • Reduction in operator fatigue.
  • Reduction in pinch point.
  • Quick and easy to use.
  • Controllable pulling for flange or any other heavy equipment.

Resources

> Electric powerseat information
> Nitro powerseat information
> Set powerseat information
> Rescue Product RESQ-DD data
> Fall brake OSCAR data

Share

Shanghai BTC Safety Products Co.,Ltd

Contact person: Jason Zhao
TEL: (0086)21-32240996 (0086)21-32240997
FAX: (0086)21-32241001
Mob: 13818087118
Email: info@btcsafe.com.cn
ADD: Room 901,Building No.3,Lane.299 Tongpu Road,Shanghai,China 200062
Website：www.btcsafe.com.cn
Contact Us | Links | Accessibility Statement | Terms of use | Site MapCopyright © 2013-2014 All Rights Reserved Shanghai Brilliance Figure hi Safety Products Co., Ltd.
  • 点击这里给我发消息
  • 点击这里给我发消息