Products
Fully Automated Z -AXIS TWIN Rockwell Hardness Tester
-
The test force is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit replace traditional dead weights. The result is highly accurate hardness test measurements at all test loads up to 0.5%.
-
Simple plug - and - play tech allows for much more quick and easy installation than traditional dead weight type machines.
-
Automated Z-Axis .Just press START key once, entire test process will be finished automatically. regardless of the size of the sample, the position of the sample, the distance between the indenter and sample surface. The sample will be auto-lifted to approach the indenter and finish hardness testing automatically.
-
Higher precision than handle wheel lifting/dead weight
Phase II+ 900-388 - 全自动双洛氏硬度计
全自动 Z 轴双洛氏硬度计
测试力通过带有称重传感器、直流电机和电子测量和控制单元的闭环控制单元施加，取代了传统的自重。 结果是在高达 0.5% 的所有测试负载下进行高度准确的硬度测试测量。
简单的即插即用技术允许比传统的自重式机器更快速、更容易地安装。
自动Z轴。只需按一次START键，整个测试过程将自动完成。 无论样品的大小、样品的位置、压头与样品表面之间的距离如何。 试样自动提升接近压头，自动完成硬度测试。
比手柄轮提升/自重精度更高
