Products
The TILT II Transformer Testers and the Quick-Check Transformer and Capacitor Testers provide quick and easy tests for opens and shorts on power distribution systems. They operate with a single push-button and provide clear indications of open circuits, short circuits and confirmation that the test results are OK.
The TILT II (Transformer Initial Livening Tester) Transformer Tester is a versatile tool for quick and easy checks of transformers and the connections made to them. In the field, the TILT II is used to test the primary and secondary sides of a new or reworked, single or three-phase transformer installation for short circuits prior to energizing. The TILT II can test the secondary sides of transformers and all the connections made to them, up to and including the meter, prior to energizing. Unlike a simple ohmmeter, the TILT II can differentiate a true short from the low resistance of a transformer winding.
In the shop, the TILT II can be used for quick screening of incoming and outgoing transformers for both primary and secondary shorts or opens (including internal fuses and breakers). The TILT II tests both 1Ø and 3Ø transformers, including potential transformers and other instrument transformers.
BENEFITS
• Tests transformers and capacitors for major defects before energizing
• Tests overhead, pad-mount and other distribution transformers as well as capacitors and capacitor banks
• Tests the primary and secondary sides of de-energized transformers without disconnecting
• Prevents line workers from installing a fuse on a shorted transformer or capacitor
• Quickly verifies the secondary connections are not shorted
FEATURES
• Large copper alligator clips with heavy duty boots
• Heavy duty rubber insulated coiled test leads
• Compact, lightweight and easy-to-use
• Powered by a 9V alkaline battery
• Super bright LED indicators
• Audible alarm confirms successful test
• Built-in self-test feature available
• Continuous testing while button is pressed
HD Electric TL-AST-M TILT II 变压器和电容器测试仪，带自动自检和磁铁
TILT II 变压器测试仪和 Quick-Check 变压器和电容器测试仪为配电系统的开路和短路提供快速简便的测试。它们通过一个按钮进行操作，并提供明确的开路、短路指示并确认测试结果正常。
TILT II（变压器初始带电测试仪）变压器测试仪是一种多功能工具，用于快速轻松地检查变压器及其连接。在现场，TILT II 用于在通电之前测试新的或改造的单相或三相变压器装置的初级和次级侧是否存在短路。 TILT II 可以在通电之前测试变压器的次级侧以及与它们进行的所有连接，直至并包括仪表。与简单的欧姆表不同，TILT II 可以区分真正的短路和变压器绕组的低电阻。
在商店中，TILT II 可用于快速筛选进出变压器的初级和次级短路或开路（包括内部熔断器和断路器）。 TILT II 可测试 1Ø 和 3Ø 变压器，包括电压互感器和其他互感器。
好处
• 在通电前测试变压器和电容器的主要缺陷
• 测试架空、底座安装和其他配电变压器以及电容器和电容器组
• 无需断开连接即可测试断电变压器的初级和次级侧
• 防止线路工人在短路的变压器或电容器上安装保险丝
• 快速验证辅助连接没有短路
特征
• 带有重型靴子的大型铜质鳄鱼夹
• 重型橡胶绝缘盘绕测试引线
• 紧凑、轻便且易于使用
• 由 9V 碱性电池供电
• 超高亮 LED 指示灯
• 声音警报确认测试成功
• 提供内置自检功能
• 按下按钮时连续测试
